Patio Design Installed at Archadeck Office

In this next installment chronicling the new deck and patio combination project at the Archadeck headquarters, I’m happy to announce that we can check the hardscape installation off as complete! Our beautiful walkway, large patio, fireplace and retaining walls were finished yesterday and it looks great!

Prepping the ground to lay pavers is a time-consuming process. As we’ve covered in previous posts, the ground first had to be leveled out so that the entire space is even. Once the ground was leveled and the footings for the retaining wall were complete, a layer of base stone is packed on the ground and then a layer of sand. Grading, base stone and sand ensures that the paver patio is level and will stay that way.

The brick-like finish flanked by Dublin Cobble is the perfect segue to the newly completed patio

The brick-like finish flanked by Dublin Cobble is the perfect segue to the newly completed patio

In our case, the majority of our pavers are from Belgard Hardscapes’ Dublin Cobble line. The pavers are very classic but have subtle variations of color that add visual interest. Because the building itself is brick, as is our main entrance walkway, we needed to incorporate another paver design so that nothing looked like an afterthought. Had we done the smaller walkway in Dublin Cobble, it wouldn’t have flowed as nicely. Instead we used a classic brick look lined with the Dublin Cobble. It really marries the two areas and finishes nicely.

retaining-wallsOnce all the pavers are set in place, polymeric sand is brush across its surface, filing the cracks between each paver. Polymeric sand is the best way to lock the patio in place. The sand, while dry, is just like any other sand, working its way into all the small spaces between pavers, but when it gets wet, it hardens and locks in place like cement. Without the sand, the pavers could become loose.

While prepare to lay patio pavers can be time consuming, laying them down doesn’t take too long, unlike building retaining walls. I am lucky enough to have a window that I can see the process and progress on our patio and deck installation. It was very interesting to watch the installation of the retaining walls as opposed to the patio. The team carefully checked the level frequently while building, making sure everything was even throughout. Those repeated checks definitely made it take longer, but it is an important step that shouldn’t be overlooked if you want a sturdy and secure retaining wall.

The next step in the build process is the deck. Our team of deck builders will be on site tomorrow to get started. The large deck will be built with TimberTech decking and will abut the patio and retaining walls (the walls will also act as built-in seating for the space).  The deck footings were dug at the same time as the patio footings so that we could have them all inspected at once.

Just to recap, here is what we started with….

photo

And now…

installing-a-patio

It has been really fun for our entire team at Archadeck Outdoor Living to watch the entire design and build process. We’ll keep you posted on the next step!

We Have an Outdoor Fireplace!

S’mores anyone?

It’s week two of our patio and deck build here at the Archadeck Outdoor Living corporate office and a lot of work has been done. The once grassy patch to the left of our building is now a construction site with bulldozers, dirt, sand and holes! Continue reading